How To Use Rouster Chem
Water scale deposits are the major cause of heat transfer loss, which in turn increases energy costs and reduces equipment life. Here are some of the many ways to use Rouster Chem to remove scale and mineral buildup.
Water Heater Sediment
First, turn off power, then drain heater tank using water hose connected to drain valve.
Then remove the hose from the drain valve and connect the swivel hose connector from a stand pipe unit (see photo). Pour Rouster Chem 4:1 solution into top of stand pipe funnel and allow to sit in tank for 60 minutes. Then open gate valve to allow scale to flow out. Repeat until water is clean.
Circulation Through Waterlines
For small projects a 5 gallon pail with submersible pump can be used to circulate 4:1 Rouster Chem solution through waterlines, radiators, or similar paths.
For larger projects a portable 15 gallon (or larger) system with external pump can be used to circulate 4:1 Rouster Chem solution through waterlines, heat exchangers, plastic injection molds, or other paths.
Soak In Solution
For hand tools or other small loose items, simply place in a container and cover with a Rouster Chem solution of 1 part RC with 2 parts water. Cover with lid to minimize evaporation. Allow to soak for up to 48 hours. Remove, rinse, and buff with rough cloth or plastic scrubber pad. Coat lightly with oil to preserve finish.
Worldwide Copyrights reserved by IPLAS (www.iplas.com)